Sigrist Pipe Chase Housing & Curbs
The original “Drop-in” solution for consolidating roof penetrations – 20 year warranty
Medium Sigrist Pipe Chase Housing is designed to accommodate up to 4 split systems (16 lines)
Standard Color: Beige
Features:
- .080” thick aluminum housing and curb (Not fiberglass or molded plastic)
- UV protected powder coated finish (2mil thick)
- Stainless steel fasteners
- Full Thermal Break in the housing and curb and lid interior
- Gaskets between the lid to housing and housing to curb connection points
Sizes
SMALL Designed for small AC condensing units – Accommodates up to 7 Sigrist Exit Seals®
| Housing #: | AL-161010 | 16.5″ x 10″ x 12.5″ tall |
| Curb #: | AL-158 | 14.5″ X 8″ X 14″ tall |
| Curb #: | ALTC-S18 | 14.5″ X 8″ X 18″ tall |
| Curb #: | ALTC-S24 | 14.5″ X 8″ X 24″ tall |
MEDIUM Sized to facilitate up to 4 split systems (up to 16 Sigrist Exit Seals® can be installed)
| Housing #: | AL-201412 | 20.5″ X 14.5″ X 12″ tall |
| Curb #: | AL-1014 | 18.5″ X 12.5″ X 14″ tall |
| Curb #: | ALTC-M18 | 18.5″ X 12.5″ X 18″ tall |
| Curb #: | ALTC-M24 | 18.5″ X 12.5″ X 24″ tall |
MEDIUM NEXT GEN
| Housing #: | AL-201412 | 20″ X 20″ X 18″ tall |
| Curb #: | ALTC-MNG18 | 18″ X 18″ X 18″ tall |
| Curb #: | ALTC-MNG24 | 18″ X 18″ X 24″ tall |
MEDIUM DOUBLE LONG
| Housing #: | KH-32H | 38" X 14.5" X 13.5" tall |
| Curb #: | KH-3214C | 36" X 12.5" X 14" tall |
| Curb #: | KH-3218C | 36" X 12.5" X 18" tall |
| Curb #: | KH-3224C | 36" X 13" X 24" tall |
LARGE
| Housing #: | AL-343424 | 34" X 34" X 24" tall |
| Curb #: | AL-3232 | 32" X 32" X 14" tall |
| Curb #: | ALTC-L18 | 32" X 32" X 18" tall |
| Curb #: | ALTC-L24 | 32" X 32" X 24" tall |
DATA CENTER HOUSING
| Housing #: | DH-186024 | 60" X 18" X 24" tall |
| Curb #: | DH-165814 | 58" X 16" X 14" tall |
| Curb #: | DH-165818 | 58" X 16" X 18" tall |
| Curb #: | DH-165824 | 58" X 16" X 24" tall |
Also shown in the above images are Sigrist Exit Seals® installed on both sizes of Sigrist Pipe Chase Housings (Fully flashed in) Medium and Data Center shown
- Sigrist Exit Seals® are available in 16 line/pipe sizes (1/4″ up to 2 7/8″)
- Injection molded ABS resin that is high impact resistant and UV protected
- Manufactured in the United States
- Limited Lifetime Warranty